Strain sensors with adjustable sensitivity by tailoring the microstructure of graphene aerogel/PDMS nanocomposites

Strain sensors with high elastic limit and high sensitivity are required to meet the rising demand for wearable electronics. Here, we present the fabrication of highly sensitive strain sensors based on nanocomposites consisting of graphene aerogel (GA) and polydimethylsiloxane (PDMS), with the primary focus being to tune the sensitivity of the sensors by tailoring the cellular microstructure through controlling the manufacturing processes. The resultant nanocomposite sensors exhibit a high sensitivity with a gauge factor of up to approximately 61.3. Of significant importance is that the sensitivity of the strain sensors can be readily altered by changing the concentration of the precursor (i.e., an aqueous dispersion of graphene oxide) and the freezing temperature used to process the GA. The results reveal that these two parameters control the cell size and cell-wall thickness of the resultant GA, which may be correlated to the observed variations in the sensitivities of the strain sensors. The higher is the concentration of graphene oxide, then the lower is the sensitivity of the resultant nanocomposite strain sensor. Upon increasing the freezing temperature from −196 to −20 °C, the sensitivity increases and reaches a maximum value of 61.3 at −50 °C and then decreases with a further increase in freezing temperature to −20 °C. Furthermore, the strain sensors offer excellent durability and stability, with their piezoresistivities remaining virtually unchanged even after 10 000 cycles of high-strain loading−unloading. These novel findings pave the way to custom design strain sensors with a desirable piezoresistive behavior.

Genome sequence of Ensifer meliloti strain WSM1022, a highly effective microsymbiont of the model legume Medicago truncatula A17

Ensifer meliloti WSM1022 is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as a legume microsymbiont of Medicago. WSM1022 was isolated in 1987 from a nodule recovered from the roots of the annual Medicago orbicularis growing on the Cyclades Island of Naxos in Greece. WSM1022 is highly effective at fixing nitrogen with M. truncatula and other annual species such as M. tornata and M. littoralis and is also highly effective with the perennial M. sativa (alfalfa or lucerne). In common with other characterized E. meliloti strains, WSM1022 will nodulate but fixes poorly with M. polymorpha and M. sphaerocarpos and does not nodulate M. murex. Here we describe the features of E. meliloti WSM1022, together with genome sequence information and its annotation. The 6,649,661 bp high-quality-draft genome is arranged into 121 scaffolds of 125 contigs containing 6,323 protein-coding genes and 75 RNA-only encoding genes, and is one of 100 rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

Knitted strain sensor textiles of highly conductive all-polymeric fibers

A scaled-up fiber wet-spinning production of electrically conductive and highly stretchable PU/PEDOT:PSS fibers is demonstrated for the first time. The PU/PEDOT:PSS fibers possess the mechanical properties appropriate for knitting various textile structures. The knitted textiles exhibit strain sensing properties that were dependent upon the number of PU/PEDOT:PSS fibers used in knitting. The knitted textiles show sensitivity (as measured by the gauge factor) that increases with the number of PU/PEDOT:PSS fibers deployed. A highly stable sensor response was observed when four PU/PEDOT:PSS fibers were co-knitted with a commercial Spandex yarn. The knitted textile sensor can distinguish different magnitudes of applied strain with cyclically repeatable sensor responses at applied strains of up to 160%. When used in conjunction with a commercial wireless transmitter, the knitted textile responded well to the magnitude of bending deformations, demonstrating potential for remote strain sensing applications. The feasibility of an all-polymeric knitted textile wearable strain sensor was demonstrated in a knee sleeve prototype with application in personal training and rehabilitation following injury.

The origin of ring strain and conformational flexibility in Tri- and Tetrasiloxane Rings and their heavier group 14 congeners

Never change a winning team. Since the appearance of the first volume in 1994 this series has become a well respected forum, and like its highly successful predecessors, this sixth volume again brings together leading experts from academia and industry to provide a comprehensive and critical survey of the frontiers of current industrial and university research. - Synthesis and characterization of new organosilicon compounds - Applications in polymer and materials science - Summary of the latest research results The result is a unique compendium with two volumes of first-hand information, vital for all experts working in this field.

Assessing the strain experienced by managers and professional Australian footballers using an augmented job strain model

Generic models of job stress, such as the Job Strain Model (JSM), have recently been criticised for focusing on a small number of general work characteristics while ignoring those that are occupation-specific (Sparks & Cooper, 1999). However this criticism is based on limited research that has not examined the relative influence of all three dimensions of the JSM - job demand, job control and social support - and job-specific stressors. The JSM is the most commonly used model underpinning large-scale occupational stress research (Fox, Dwyer, & Ganster, 1993) and is regarded as the most influential model in the research on the psycho-social work environment, stress and disease in recent times (Kristensen, 1995). This thesis addresses the lack of information on the relative influence of the JSM and job-specific stressors by assessing the capacity of an augmented JSM to predict the strain experienced by managers and professional Australian footballers. The augmented JSM consisted of job-specific stressors in addition to the generic components of the model. Managers and professional Australian footballers represent two very different occupational groups. While the day-today roles of a manager include planning, organising, monitoring and controlling (Carroll & Gillen, 1987), the working life of a professional Australian footballer revolves around preparing for and playing football (Shanahan, 1998). It was expected that the large differences in the work undertaken by managers and professional Australian footballers would maximise the opportunities for identifying job-specific stressors and measuring the extent that these vary from one group to the next. The large disparity between managers and professional footballers was also used to assess the cross-occupational versatility of the JSM when it had been augmented by job-specific stressors. This thesis consisted of three major studies. Study One involved a survey of Australian managers, while studies Two and Three focused on professional Australian footballers. The latter group was under-represented in the literature, and as a result of the lack of information on the stressors commonly experienced by this group, an in-depth qualitative study was undertaken in Study Two. The results from Study Two then informed the survey of professional footballers that was conducted in Study Three. Contrary to previous research examining the relative influence of generic and job-specific stressors, the results only provided moderate support for augmenting the JSM with job-specific stressors. Instead of supporting the versatility of the augmented JSM, the overall findings reinforced the broad relevance of the original JSM. Of the four health outcomes measured in Studies One and Three, there was only one - the psychological health of professional Australian footballers - where the proportion of total variance explained by job-specific stressors exceeded 13%. Despite the generally strong performance of the JSM across the two occupational groups, the importance of demand, control and support diminished when examining the less conventional occupation of professional football. The generic model was too narrow to capture the highly specific work characteristics that are important for this occupational group and, as a result, the job-specific stressors explained significantly more of the strain over and above that already provided by the generic model. These findings indicate that when investigating the stressors experienced by conventional occupational groups such as managers, the large amount resources required to identify job-specific stressors are unlikely to be cost-effective. In contrast, the influence of the more situation specific stressors is significantly greater in unconventional occupations and thus the benefits of identifying these non-generic stressors are more likely to outweigh the costs. Studies One and Three identified strong connections between job-specific stressors and important characteristics of the occupation being studied. These connections were consistent with previous research and suggest that before attempting to identify job-specific stressors, researchers need to first become familiar with the nature and context of the occupation. The final issue addressed in this thesis was the role of work and non-work support. The findings indicate that the support provided by supervisors and colleagues was a significant predictor of wellbeing for both managers and professional footballers. In contrast, the level of explained strain accounted for by non-work support was not significant. These results indicate that when developing strategies to protect and enhance employee well-being, particular attention should be given to monitoring and, where necessary, boosting the effectiveness of work-based support. The findings from this thesis have been fed back to the management and sporting communities via conference presentations and peer-reviewed journals (refer pp 220-221). All three studies have been presented at national and international conferences and, overall, were well received by participants. Similarly, the methods, results and major findings arising from Studies One and Two have been critiqued by anonymous reviewers from two international journals. These papers have been accepted for publication in 2001 and 2002 and feedback from the reviewers indicates that the findings represent a significant and unique contribution to the literature. The results of Study Three are currently under review by a sports psychology journal.

Effect of tensile pre-strain on bending and unloading of automotive steels

In recent years, advanced high strength steels (AHSS) have been used in a wide range of automotive applications; they may have property variations through the thickness and the properties may also be dependent of prior processing including pre-straining. In order to model forming processes precisely using, for example, finite element analysis, it is important that material input data should adequately reflect these effects. It is known that shape defects in roll forming are related to small strains in material that has undergone prior deformation in a different strain path. Much research has already been performed on the change in the Young’s Modulus once a steel sheet has been plastically deformed,however many of these tests have only been conducted using tensile testing, and therefore may not take into account differences in compressive and tensile unloading. This research investigates the effect of tensile pre-straining on bending behaviour for various types of material;in bending, one half of the sheet will load and unload in compression and hence experience deformation under a reversed stress. Four different materials were pre-strained in tension with 1%, 3%, 7%, 11% and 25% elongation. Using a free bending test, moment curvature diagrams were obtained for bending and unloading. The results showed that the characteristics of the moment curvature diagram depended on the degree of pre-straining; more highly strained samples showed an earlier elastic-plastic transformation and a decreased Young's Modulus during unloading. This was compared to previous literature results using only tensile tests. Our results could influence the modeling of springback in low tension sheet operations, such as roll forming.

Job strain exposures vs. stress-related workers’ compensation claims in Victoria, Australia: developing a public health response to job stress

We present a comparative analysis of patterns of exposure to job stressors and stress-related workers’ compensation (WC) claims to provide an evaluation of the adequacy of claims-driven policy and practice. We assessed job strain prevalence in a 2003 population-based survey of Victorian [Australia] workers and compared these results with stress-related WC statistics for the same year. Job strain prevalence was higher among females than males, and elevated among lower vs. higher occupational skill levels. In comparison, claims were higher among females than males, but primarily among higher skill-level workers. There was some congruence between exposure and WC claims patterns. Highly exposed groups in lower socio-economic positions were underrepresented in claims statistics, suggesting that the WC insurance perspective substantially underestimates the job stress problems for these groups. Thus to provide a sufficient evidence base for equitable policy and practice responses to this growing public health problem, exposure or health outcome data are needed as an essential complement to claims statistics.

Highly Stretchable Conducting SIBS-P3HT Fibers

Poly(styrene-β-isobutylene-β-styrene)-poly(3-hexylthiophene) (SIBS-P3HT) conducting composite fibers are successfully produced using a continuous flow approach. Composite fibers are stiffer than SIBS fibers and able to withstand strains of up 975% before breaking. These composite fibers exhibit interesting reversible mechanical and electrical characteristics, which are applied to demonstrate their strain gauging capabilities. This will facilitate their potential applications in strain sensing or elastic electrodes. Here, the fabrication and characterization of highly stretchable electrically conducting SIBS-P3HT fibers using a solvent/non-solvent wet-spinning technique is reported. This fabrication method combines the processability of conducting SIBS-P3HT blends with wet-spinning, resulting in fibers that could be easily spun up to several meters long. The resulting composite fiber materials exhibit an increased stiffness (higher Young’s modulus) but lower ductility compared to SIBS fibers. The fibers’ reversible mechanical and electrical characteristics are applied to demonstrate their strain gauging capabilities.

Genome sequence of Ensifer arboris strain LMG 14919T, a microsymbiont of the legume Prosopis chilensis growing in Kosti, Sudan

Ensifer arboris LMG 14919T is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as a legume microsymbiont of several species of legume trees. LMG 14919T was isolated in 1987 from a nodule recovered from the roots of the tree Prosopis chilensis growing in Kosti, Sudan. LMG 14919T is highly effective at fixing nitrogen with P. chilensis (Chilean mesquite) and Acacia senegal (gum Arabic tree or gum acacia). LMG 14919T does not nodulate the tree Leucena leucocephala, nor the herbaceous species Macroptilium atropurpureum, Trifolium pratense, Medicago sativa, Lotus corniculatus and Galega orientalis. Here we describe the features of E. arboris LMG 14919T, together with genome sequence information and its annotation. The 6,850,303 bp high-quality-draft genome is arranged into 7 scaffolds of 12 contigs containing 6,461 protein-coding genes and 84 RNA-only encoding genes, and is one of 100 rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

Genome sequence of Burkholderia mimosarum strain LMG 23256T, a mimosa pigra microsymbiont from Anso, Taiwan

Burkholderia mimosarum strain LMG 23256T is an aerobic, motile, Gram-negative, non-spore-forming rod that can exist as a soil saprophyte or as a legume microsymbiont of Mimosa pigra (giant sensitive plant). LMG 23256T was isolated from a nodule recovered from the roots of the M. pigra growing in Anso, Taiwan. LMG 23256T is highly effective at fixing nitrogen with M. pigra. Here we describe the features of B. mimosarum strain LMG 23256T, together with genome sequence information and its annotation. The 8,410,967 bp high-quality-draft genome is arranged into 268 scaffolds of 270 contigs containing 7,800 protein-coding genes and 85 RNA-only encoding genes, and is one of 100 rhizobial genomes sequenced as part of the DOE Joint Genome Institute 2010 Genomic Encyclopedia for Bacteria and Archaea-Root Nodule Bacteria (GEBA-RNB) project.

Electrospun fibrous membranes with super-large-strain electric superhydrophobicity

Large-strain elastic superhydrophobicity is highly desirable for its enhanced use performance and functional reliability in mechanically dynamic environments, but remains challenging to develop. Here we have, for the first time, proven that an elastic fibrous membrane after surface hydrophobization can maintain superhydrophobicity during one-directional (uniaxial) stretching to a strain as high as 1500% and two-direction (biaxial) stretching to a strain up to 700%. The fibrous membrane can withstand at least 1,000 cycles of repeated stretching without losing the superhydrophobicity. Stretching slightly increases the membrane air permeability and reduces water breakthrough pressure. It is highly stable in acid and base environments. Such a permeable, highly-elastic superhydrophobic membrane may open up novel applications in membrane separation, healthcare, functional textile and energy fields.

Highly-twisted, continuous nanofibre yarns prepared by a hybrid needle-needleless electrospinning technique

Nanofibres prepared by electrospinning have shown enormous potential for various applications. They are obtained predominantly in the form of nonwoven fibre webs. The 2-dimensional nonwoven feature and fragility have considerably confined their further processing into fabrics through knitting or weaving. Nanofibre yarns, which are nanofibre bundles with continuous length and a twist feature, show improved tensile strength, offering opportunities for making 3-dimensional fibrous materials with precisely controlled fibrous architecture, porous features and fabric dimensions. Despite a few techniques having been developed for electrospinning nanofibre yarns, they are chiefly based on the needle electrospinning technique, which often has low nanofibre productivity. In this study, we for the first time report a nanofibre yarn electrospinning technique which combines both needle and needleless electrospinning. A rotating intermediate ring collector was employed to directly collect freshly-electrospun nanofibres into a fibrous cone, which was further drawn and twisted into a nanofibre yarn. This novel system was able to produce high tenacity yarn (tensile strength 128.9 MPa and max strain 222.1%) at a production rate of 240 m h^-1, with a twist level up to 4700 twists per metre. The effects of various parameters, e.g. position of the electrospinning units, operating conditions and polymer concentration, on nanofibre and yarn production were examined.

Understanding response surface optimisation to the modeling of Astaxanthin extraction from a novel strain Thraustochytrium sp. S7

A fast growing, highly orange color pigmented strain of Thraustochytrids was isolated from New Zealand marine waters. This strain showed efficient utilization of glycerol as carbon source and produced significant amount of cell dry biomass (2.08gL-1), TFA (30.15% of dry cell weight), DHA (27.83% of TFA) and astaxanthin (131.56μgg-1). Astaxanthin is the dominant constituent in the carotenoid profile of Thraustochytrium sp. S7 and is an important antioxidant. Different cell disruption methods were applied for efficient astaxanthin extraction. Mechanical disruption of cells via ultrasonication resulted in the highest astaxanthin yield, from 26.78±1.25μgg-1 to 156.07±4.16μgg-1. Optimization of ultrasonication process using response surface methodology resulted into significant decrease in lysis time from 30min to 10min. This strain can be used for concurrent production of lipids and high value co-products such as DHA and astaxanthin.